Need help?Do you have a question about the Ingersoll-Rand 41 Series and is the answer not in the manual?
Safety warnings for potential death or serious injury from improper use.
Instructions for lubricating the tool's components during maintenance.
Steps to dismantle the right-angle drive assembly of the tool.
Procedures for taking apart the clutch mechanism of the tool.
General guidance and precautions for assembling the tool.
Step-by-step instructions for assembling the tool's housing.
Procedures for assembling the motor components.
General| Model | 41 Series |
|---|---|
| Air Inlet | 1/4" NPT |
| Air Pressure | 90 PSI |
| Type | Pneumatic Screwdriver |
| Drive Size | 1/4" |
| Free Speed | 2, 500 RPM |
| Air Consumption | 4 CFM |
| Weight | 1.5 lbs |
To Next Page
