Ingersoll-Rand 4TVW0007B100NC User Manual

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SAFETY WARNING

Only qualified personnel should install and service the equipment. The installation, starting up, and

servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific

knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could

result in death or serious injury. When working on the equipment, observe all precautions in the literature

and on the tags, stickers, and labels that are attached to the equipment.

November 2014

Installation, Operation,

and Maintenance

Variable Refrigerant Flow System

High-Wall Indoor Unit Series

(with Factory-Installed EEV)

Models: 4TVW0007B100NC, 4TVW0009B100NC, 4TVW0012B100NC,

4TVW0018B100NC, 4TVW0020B100NC, 4TVW0024B100NC

VRF-SVX30C-EN

Table of Contents

Questions and Answers:

E
ejohnsonAug 15, 2025
Why is my Ingersoll-Rand Air Conditioner not producing warm or cool air?
- L
  Luis DavidsonAug 15, 2025
  If your Ingersoll-Rand Air Conditioner isn't producing warm or cool air, verify that the temperature setting on the remote control is appropriately higher or lower than the current temperature. Check if the air filter is clogged, and if the unit was just turned on, allow 3 minutes for the anti-short cycle timer to expire. Ensure that airflow is unobstructed, the line size and length are correct, and the operating mode is set to heat or cool. Also, make sure the unit isn't installed in direct sunlight.
R
Robert JenkinsAug 18, 2025
What to do if my Ingersoll-Rand 4TVW0007B100NC does not operate?
- C
  Cindy GonzalesAug 18, 2025
  If your Ingersoll-Rand Air Conditioner isn't operating, ensure the power plug is properly inserted into the wall receptacle. Also, check for any power failures and make sure the circuit breaker is switched on or that the fuses are in good condition.
R
Robin TateAug 22, 2025
Why does the fan speed not change on my Ingersoll-Rand 4TVW0007B100NC?
- J
  Joseph AlexanderAug 22, 2025
  If the fan speed on your Ingersoll-Rand Air Conditioner isn't changing, verify that Auto or Dry mode is selected, as these modes automatically adjust the fan speed.
M
Matthew ConwayAug 26, 2025
Why is my Ingersoll-Rand 4TVW0007B100NC remote control not working?
- K
  Kevin BowersAug 26, 2025
  If your Ingersoll-Rand Air Conditioner remote control isn't working, check if the batteries are depleted or installed incorrectly. Ensure nothing is blocking the remote control sensor and that there's no strong fluorescent or neon lighting nearby that could interrupt the signal.
K
Kelly GrantAug 28, 2025
Why does the temperature not change on my Ingersoll-Rand 4TVW0007B100NC Air Conditioner?
- S
  Steven StewartAug 28, 2025
  If the temperature isn't changing on your Ingersoll-Rand Air Conditioner, make sure the unit isn't operating in Fan mode. If it is, select a different mode.
R
Rebekah WileySep 1, 2025
Why does my Ingersoll-Rand 4TVW0007B100NC not operate immediately after restarting?
- T
  tinamackSep 1, 2025
  If your Ingersoll-Rand Air Conditioner does not operate immediately after restarting, it may be due to the anti-short cycle timer, which prevents immediate operation to avoid overloading. The unit will start in 3 minutes.
A
Amanda VillarrealSep 4, 2025
How to fix timer function on Ingersoll-Rand 4TVW0007B100NC Air Conditioner?
- C
  Christopher NelsonSep 4, 2025
  If the timer function on your Ingersoll-Rand Air Conditioner isn't working, press the Power button on the remote control after setting the time.
J
jthompsonSep 7, 2025
What to do if odors permeate the room during operation of Ingersoll-Rand Air Conditioner?
- T
  Tammy MaynardSep 7, 2025
  If odors permeate the room during operation of your Ingersoll-Rand Air Conditioner, verify the origin of the odor. You can operate the unit in Fan mode or open the windows to air out the room.
M
Madison Copeland MDSep 12, 2025
What to do if my Ingersoll-Rand Air Conditioner does not turn on/off with the wired remote control?
- J
  johnsoncrystalSep 12, 2025
  If your Ingersoll-Rand Air Conditioner does not turn on or off with the wired remote control, ensure that the wired remote control is not set for Group Control.

Ingersoll-Rand 4TVW0007B100NC Specifications

General

Brand	Ingersoll-Rand
Model	4TVW0007B100NC
Category	Air Conditioner
Language	English

Related product manuals

Ingersoll-Rand 4TVB0005B100NC

Trane 4TWL6018A1000A

Preview: Ingersoll-Rand 4MUC4518A10N0A

Ingersoll-Rand 4MUC4518A10N0A

American Standard 4A7L6018A1000A

Ingersoll-Rand YSC036

Ingersoll-Rand YSC037E

Ingersoll-Rand YSC033G

Preview: Ingersoll-Rand EAC180-300AK

Ingersoll-Rand EAC180-300AK

Preview: Ingersoll-Rand TEM6A0B24H21S

Ingersoll-Rand TEM6A0B24H21S

Ingersoll-Rand TEM6A0C48H41S

Ingersoll-Rand TEM6A0B30H21S

Preview: Precedent eFlex TZC072F3

Precedent eFlex TZC072F3