Ingersoll-Rand 4TVB0005B100NC User Manual

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SAFETY WARNING

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing

of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and

training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or

serious injury. When working on the equipment, observe all precautions in the literature and on the tags,

stickers, and labels that are attached to the equipment.

Variable Refrigerant Flow System

Mini 4-Way Cassette Indoor Unit Series

Models:

4TVB0005B100NC

4TVB0007B100NC

4TVB0009B100NC

4TVB0012B100NC

4TVB0018B100NC

4TVB0020B100NC

VRF-SVX28D-EN

February 2017

Installation, Operation,

and Maintenance

Table of Contents

Questions and Answers:

S
Stacy WoodAug 18, 2025
Why is my Ingersoll-Rand Air Conditioner not producing warm or cool air?
- E
  Eric RobinsonAug 18, 2025
  If your Ingersoll-Rand Air Conditioner isn't producing warm or cool air, check the following: Ensure the temperature setting on the remote is appropriately higher or lower than the current room temperature. Make sure the air filter isn't clogged with dirt. If you've just turned the unit on, allow 3 minutes for the anti-short cycle timer to expire. Confirm that airflow isn't obstructed, the line size and length are correct, and the operating mode is set to heat or cool. If it's not producing warm air, verify it's not accidentally set to Cool mode. Also, ensure the remote control is compatible and that the unit isn't installed in direct sunlight; if it is, use curtains or shades.
J
Joshua MorrisAug 20, 2025
What to do if my Ingersoll-Rand 4TVB0005B100NC does not operate?
- J
  Julia SullivanAug 20, 2025
  If your Ingersoll-Rand Air Conditioner isn't operating, verify that the power plug is properly inserted into the wall receptacle, that there hasn't been a power failure, and that the circuit breaker is switched on or the fuses are in good condition.
T
Taylor KnappAug 23, 2025
Why does the fan speed not change on my Ingersoll-Rand 4TVB0005B100NC Air Conditioner?
- N
  nathan46Aug 23, 2025
  If the fan speed on your Ingersoll-Rand Air Conditioner isn't changing, it might be because Auto or Dry mode is selected. In these modes, the fan speed is automatically adjusted.
G
gloria01Aug 26, 2025
What to do if water is dripping from the air flow blades of my Ingersoll-Rand 4TVB0005B100NC Air Conditioner?
- M
  Matthew MooreAug 26, 2025
  If water is dripping from the airflow blades of your Ingersoll-Rand Air Conditioner, and the unit has been running for a while with the blades fully open, adjust the blades to the mid-position to reduce condensation.
S
Sandy MeadowsAug 28, 2025
Why is my Ingersoll-Rand 4TVB0005B100NC remote control not working?
- V
  Vanessa ParkerAug 28, 2025
  If the remote control for your Ingersoll-Rand Air Conditioner isn't working, check if the batteries are depleted or incorrectly installed. Also, ensure that nothing is blocking the remote control sensor and that there isn't strong fluorescent or neon lighting near the unit that might interrupt the signal.
B
byoungAug 30, 2025
Why does my Ingersoll-Rand 4TVB0005B100NC Air Conditioner not operate immediately after restarting?
- M
  Matthew DanielsAug 31, 2025
  If your Ingersoll-Rand Air Conditioner doesn't operate immediately after restarting, this is normal. The anti-short cycle timer prevents immediate operation to avoid overloading. The unit will start in 3 minutes.
P
Patricia AguirreSep 2, 2025
Why does the temperature not change on my Ingersoll-Rand 4TVB0005B100NC?
- C
  Christina GibsonSep 2, 2025
  If the temperature isn't changing on your Ingersoll-Rand Air Conditioner, make sure the unit is not operating in Fan mode. If it is, select a different mode.
A
Ana AllenSep 4, 2025
What to do if indicators on the digital display of my Ingersoll-Rand 4TVB0005B100NC Air Conditioner are flashing?
- J
  Jesus WrightSep 4, 2025
  If the indicators on the digital display of your Ingersoll-Rand Air Conditioner are flashing, turn the unit off using the Power button on the remote control. Then, switch the circuit breaker off and then on again.
A
ayerschrisSep 7, 2025
How to fix the timer function on my Ingersoll-Rand 4TVB0005B100NC Air Conditioner?
- R
  Ronald GuerreroSep 7, 2025
  If the timer function on your Ingersoll-Rand Air Conditioner isn't working, press the Power button on the remote control after setting the time.
E
Eric AdamsSep 9, 2025
What to do if odors permeate the room during operation of Ingersoll-Rand Air Conditioner?
- D
  derek88Sep 9, 2025
  If odors permeate the room when your Ingersoll-Rand Air Conditioner is running, try to identify the source of the odor. You can operate the unit in Fan mode or open the windows to air out the room.

Ingersoll-Rand 4TVB0005B100NC Specifications

General

Category	Air Conditioner
Model	4TVB0005B100NC
Phase	1
Frequency	60 Hz
Refrigerant Type	R-410A
Voltage	208/230V
SEER Rating	13
Cooling Capacity	5 Ton (60, 000 BTU)

Related product manuals

Ingersoll-Rand 4TVW0007B100NC

Trane 4TWL6018A1000A

Preview: Ingersoll-Rand 4MUC4518A10N0A

Ingersoll-Rand 4MUC4518A10N0A

American Standard 4A7L6018A1000A

Ingersoll-Rand YSC036G

Ingersoll-Rand YSC037E

Preview: Ingersoll-Rand EAC180-300AK

Ingersoll-Rand EAC180-300AK

Ingersoll-Rand TEM6A0C48H41S

Preview: Ingersoll-Rand TEM6A0B24H21S

Ingersoll-Rand TEM6A0B24H21S

Ingersoll-Rand TEM6A0B30H21S

Preview: Precedent eFlex TZC072F3

Precedent eFlex TZC072F3

Preview: Odyssey TTA073G A Series

Odyssey TTA073G A Series