Ingersoll-Rand TEM6A0B30H21S User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
January 2016
18-GF74D1-1F-EN
Convertible Air Handlers
2 — 5 Ton
TEM6A0B24H21S
TEM6A0B30H21S
TEM6A0C36H31S
TEM6A0C42H41S
TEM6A0C48H41S
TEM6A0D48H41S
TEM6A0C60H51S
TEM6A0D60H51S
The TEM6 series air handler is designed for installation in a closet,
utility room, alcove, basement, crawlspace or attic. These versatile
units are applicable to air conditioning and heat pump
applications. Several models are available to meet the specific
requirements of the outdoor equipment. Field installed electric
resistance heaters are available.
Installer’s Guide

Ingersoll-Rand TEM6A0B30H21S Specifications

General

Model Number	TEM6A0B30H21S
Category	Air Conditioner
Cooling Capacity	30000 BTU/H
Refrigerant	R-410A
Air Flow (High Speed)	1200 CFM
Sound Pressure Level (High Speed)	56 dB(A)
Power Supply	208-230 V / 1 Ph / 60 Hz

Summary

Air Handler Safety Information

Hazardous Voltage and Electrical Safety

Warnings and cautions regarding hazardous voltage, live components, and proper grounding.

Refrigerant and Coil Pressure Hazards

Cautions for pressurized refrigerant and coils, emphasizing safe handling and pressure release.

Product Features and Installation

Installation Guidelines

Instructions for unpacking, unit location, ductwork, and condensate drain setup.

Electrical and Control Wiring

Guidance on field wiring, thermostat selection, and sequence of operation.

Maintenance and Checkout

Procedures for system operation, checkout, and periodic maintenance.

Field Wiring Diagrams

Single Stage Wiring Configurations

Two Stage Wiring Configurations

Performance and Electrical Data

Electrical Data Overview

Coil Conversion Instructions

Downflow Configuration Conversion

Horizontal Right Configuration Conversion

Final System Checkout

Installation Checklist

A checklist of common items to confirm before completing the installation.