Ingersoll-Rand D240IN-A User Manual

30 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Cod. 710.0138.45.00 Rev04 – 02.2019

- EN -

DIRECT EXPANSION COMPRESSED AIR DRYERS

Operators Manual

Valid for 60 Hz dryers G version

D12IN-A

230/1/60

D25IN-A

D42IN-A

D54IN-A

D72IN

-

A

D108IN-A

D144IN-A

D180IN-A

D240IN-A

D300IN-A

D360IN-A

D480IN-A

D600IN-A

230/1/60 460/3/60

D780IN-A

380/3/60 460/3/60

D950IN-A

Table of Contents

Other manuals for Ingersoll-Rand D240IN-A

Product Information28 pages

Questions and Answers:

A
Amy RobertsAug 7, 2025
Why is there low pressure in the line of my Ingersoll-Rand D240IN-A?
- L
  Lauren StanleyAug 7, 2025
  If you're experiencing low pressure in the line of your Ingersoll-Rand Dehumidifier, several factors could be the cause. First, ice might be forming in the evaporator. You should check the probe and the electronic control board; if the problem continues, consider replacing them. You may need to contact a service center to check the gas charge. Alternatively, ensure the compressed air inlet/outlet is properly connected, the connecting tubing isn't clogged, and no valves are closed. Also, inspect the filter's condition. If air flows continuously through the condensate drainage, the drainage solenoid valve might be jammed; try cleaning or replacing it.
D
Dennis BondAug 21, 2025
What to do if low pressure persists in Ingersoll-Rand D240IN-A Dehumidifier D12-480IN-A or D600-950IN-A?
- S
  sandy04Aug 21, 2025
  For Ingersoll-Rand Dehumidifier model D12-480IN-A with low line pressure, first verify the condensate drainage times set on the electronic control board (C8 and C9). Then, check the signal from the control board. If the signal is continuous, it may be necessary to replace the control board. For model D600-950IN-A, inspect the no loss condensate drain and replace it if the issue persists.

Ingersoll-Rand D240IN-A Specifications

General

Brand	Ingersoll-Rand
Model	D240IN-A
Type	Industrial Dehumidifier
Moisture Removal Capacity	240 pints per day
Phase	1
Hertz	60 Hz
Airflow	700 CFM
Refrigerant	R410A

Summary

Symbols and Labels Used in the Manual and on the Dryer

General Safety Symbols and Warnings

Explains common warning symbols like "Read manual", "Attention", "Under pressure", "Hot surface", "Electric shock", "Moving parts".

Specific Warning Texts and Labels

Details specific warnings (CAUTION boxes), multilingual cleaning notes, and initial start-up instructions.

1. General Information

1.2 Safe Use of the Dryer

Outlines essential safety precautions for operating the dryer.

1.2 Use of the Machine in Safe Conditions

Outlines essential safety precautions for operating the dryer.

2. Installation

2.3 Installation

Step-by-step guide for the physical installation of the compressed air dryer.

3. Start Up

3.2 Before Start Up

3.3 Start Up

4. Maintenance, Troubleshooting and Dismantling

4.1 Maintenance

4.2 Troubleshooting

Provides guidance for diagnosing and resolving common operational problems.

(C) Data Sheet

Related product manuals

Ingersoll-Rand D221IM

Ingersoll-Rand D25IN-A

Ingersoll-Rand D2520IN-A

Preview: Ingersoll-Rand D41IM

Ingersoll-Rand D41IM

Ingersoll-Rand DXR800

Ingersoll-Rand D510IN

Ingersoll-Rand D1190IN

Ingersoll-Rand D18IN-A

Preview: Ingersoll-Rand D42IN-A

Ingersoll-Rand D42IN-A

Preview: Ingersoll-Rand D12IN-A

Ingersoll-Rand D12IN-A

Ingersoll-Rand D360IN-A

Ingersoll-Rand D108IN-A