Ingersoll-Rand S9V2B060U3PSBA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
February 2017
1188--CCEE0011DD11--11FF--EENN
D345855P01
Upflow/Horizontal and Downflow
Gas-Fired, Direct/Non-Direct Vent, 2–Stage
Condensing Variable Speed Furnaces
UUppffllooww,, CCoonnvveerrttiibbllee ttoo
HHoorriizzoonnttaall RRiigghhtt oorr
HHoorriizzoonnttaall LLeefftt
S9V2B040U3PSBA
S9V2B060U3PSBA
S9V2B060U4PSBA
S9V2B080U3PSBA
S9V2B080U4PSBA
S9V2C080U5PSBA
S9V2C100U4PSBA
S9V2C100U5PSBA
S9V2D120U5PSBA
DDoowwnnffllooww OOnnllyy
S9V2B040D3PSBA
S9V2B060D3PSBA
S9V2B080D3PSBA
S9V2B080D4PSBA
S9V2C100D4PSBA
S9V2C100D5PSBA
S9V2D120D5PSBA
NNoottee:: Graphics in this document are for representation
only. Actual model may differ in appearance.
Installer’s Guide

Ingersoll-Rand S9V2B060U3PSBA Specifications

General

Brand	Ingersoll-Rand
Model	S9V2B060U3PSBA
Category	Furnace
Language	English

Summary

Safety Section - Furnaces

Fire and Explosion Hazards

Covers hazards from gas leaks, flammable vapors, and improper lighting.

Electrical Shock and Operation Hazards

Warns about electrical shock during servicing and improper operation.

Carbon Monoxide Poisoning Hazards

Highlights risks of CO poisoning due to improper venting.

Installation and Material Safety

Electrical Safety and Furnace Operation

Venting System Safety and CO Risks

Furnace Installation Guidelines

Installation Safety Practices

Outlines essential safety practices for furnace installation and servicing.

General Installation Guidelines

Locations and Clearances

Specifies minimum clearances to combustible materials and location considerations.

Furnace General Installation

Gas Piping Configurations (Upflow)

Illustrates gas piping connections for upflow furnace installations.

Gas Piping Configurations (Horizontal)

Illustrates gas piping connections for horizontal furnace installations.

Gas Supply Requirements and Orifice Sizes

Details gas supply piping, pressure, and main burner orifice sizes.

Combustion and Input Check Procedure

Outlines the procedure for checking combustion and input rates.

Gas Valve Adjustment Procedure

Step-by-step guide for adjusting the gas valve manifold pressure settings.

High Altitude Derate and Orifice Selection

Explains altitude derating and selecting replacement orifices for high altitudes.

General Venting Requirements

Details general requirements for venting, including positive pressure systems.

Special Case Venting: Inlet Air Condensation (Option 1)

Special Case Venting: Top and Side Intake Options (2 & 3)

Vent Terminations and Accessories

Venting System Material Requirements

Approved Plastic Vent Pipe Materials

Maximum Vent Lengths by Model and Altitude

Provides tables for maximum vent and inlet air pipe lengths based on model and altitude.

Horizontal Venting Requirements

Details specific requirements for horizontal venting applications, including offset couplings.

Venting Through Combustible Walls

Venting Through Non-Combustible Walls

Horizontal Venting Through Wall Configurations

Horizontal Venting with Concentric Vent Kit

Massachusetts Venting Regulations

Non-Direct Vent Termination Clearances

Direct Vent Termination Clearances

Venting Through The Roof Support Requirements

Venting Through Unused Chimney (PVC)

Venting Through Unused Chimney (Stainless Steel)