Ingersoll-Rand S9V2B080U3PSBA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
February 2018
1188--CCEE0011DD11--11GG--EENN
Upflow/Horizontal and Downflow
Gas-Fired, Direct/Non-Direct Vent, 2–Stage
Condensing Variable Speed Furnaces
UUppffllooww,, CCoonnvveerrttiibbllee ttoo
HHoorriizzoonnttaall RRiigghhtt oorr
HHoorriizzoonnttaall LLeefftt
S9V2B040U3PSBA
S9V2B060U3PSBA
S9V2B060U4PSBA
S9V2B080U3PSBA
S9V2B080U4PSBA
S9V2C080U5PSBA
S9V2C100U4PSBA
S9V2C100U5PSBA
S9V2D120U5PSBA
DDoowwnnffllooww OOnnllyy
S9V2B040D3PSBA
S9V2B060D3PSBA
S9V2B080D3PSBA
S9V2B080D4PSBA
S9V2C100D4PSBA
S9V2C100D5PSBA
S9V2D120D5PSBA
NNoottee:: Graphics in this document are for
representation only. Actual
model may differ in appearance.
18-CE01D1-1G-EN
Installer’s Guide

Ingersoll-Rand S9V2B080U3PSBA Specifications

General

Model Number	S9V2B080U3PSBA
Brand	Ingersoll-Rand
Category	Furnace
Input BTU	80, 000
Blower Motor	Variable Speed
Stages	Two-Stage
Vent Type	Direct Vent
Fuel Type	Natural Gas
Type	Gas
Efficiency	96% AFUE
Warranty	10-Year Limited

Summary

Furnace General Installation

Gas Piping

Instructions and diagrams for connecting the gas supply to the furnace.

General Venting

Guidelines for proper installation of furnace venting systems.

Duct Connections

Procedures for connecting supply and return air ducts to the furnace.

Electrical Connections

Instructions for making electrical connections to the furnace control.

Field Wiring

Diagrams and notes for connecting thermostat and outdoor unit wiring.

General Start-up and Adjustment

Control and Safety Switch Adjustment

Procedures for checking and adjusting limit switches and controls.

Furnace Combustion Air Exhaust Options

Integrated Furnace Control Display Codes

Error Codes

Explanations of various error codes displayed by the IFC.

Fault Code Recovery

Steps for viewing and clearing stored fault codes.

Sequence of Operation