Ingersoll-Rand S9V2B080U4PSBA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
February 2018
1188--CCEE0011DD11--11GG--EENN
Upflow/Horizontal and Downflow
Gas-Fired, Direct/Non-Direct Vent, 2–Stage
Condensing Variable Speed Furnaces
UUppffllooww,, CCoonnvveerrttiibbllee ttoo
HHoorriizzoonnttaall RRiigghhtt oorr
HHoorriizzoonnttaall LLeefftt
S9V2B040U3PSBA
S9V2B060U3PSBA
S9V2B060U4PSBA
S9V2B080U3PSBA
S9V2B080U4PSBA
S9V2C080U5PSBA
S9V2C100U4PSBA
S9V2C100U5PSBA
S9V2D120U5PSBA
DDoowwnnffllooww OOnnllyy
S9V2B040D3PSBA
S9V2B060D3PSBA
S9V2B080D3PSBA
S9V2B080D4PSBA
S9V2C100D4PSBA
S9V2C100D5PSBA
S9V2D120D5PSBA
NNoottee:: Graphics in this document are for
representation only. Actual
model may differ in appearance.
18-CE01D1-1G-EN
Installer’s Guide

Ingersoll-Rand S9V2B080U4PSBA Specifications

General

Model Number	S9V2B080U4PSBA
Brand	Ingersoll-Rand
Category	Furnace
Input BTU	80, 000
Blower Motor	Variable Speed
Ignition	Hot Surface Ignition
Heat Exchanger	Stainless Steel
Type	Gas
Stages	Two-Stage
Warranty	Lifetime Heat Exchanger Warranty

Summary

Furnace Installation Guidelines

Safety Practices and Precautions

Essential safety practices and precautions to be followed during installation, servicing, and operation.

General Guidelines

Manufacturer's responsibilities, installation codes, and general site preparation recommendations.

Locations and Clearances

Requirements for selecting a proper installation location and necessary clearances around the furnace.

Furnace General Installation

Gas Piping

Guidelines and diagrams for connecting the gas supply to the furnace.

General Venting

Requirements for venting the furnace exhaust to the outdoors using positive-pressure systems.

Duct Connections

Electrical Connections

Field Wiring

Diagrams and instructions for field wiring the furnace to thermostats and outdoor units.

General Start-up and Adjustment

Preliminary Inspections

Control and Safety Switch Adjustment