To Next PageTo Next Page
Need help?Do you have a question about the Ingersoll-Rand SS5 and is the answer not in the manual?
General| Brand | Ingersoll-Rand |
|---|---|
| Model | SS5 |
| Category | Air Compressor |
| Language | English |
Guidance on installation, operation, and troubleshooting issues, plus missing or damaged parts.
Steps to report and receive missing parts, requiring serial, part, and model numbers.
Procedures for reporting products received in unsatisfactory condition or with defects.
Explains hazard signal words (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Essential safety measures for operating and maintaining the air compressor unit.
Warning about serious injury from moving parts; disconnect power before servicing.
Caution against touching hot surfaces to prevent serious injury. Allow to cool.
Risks associated with high pressure air and safety valve modifications.
Advises using approved parts and not exceeding pressure limits to prevent bursting.
Further safety guidelines for operation, including ventilation and avoiding hazardous environments.
Overview of accessories like filters and lubricators for air tool operation.
Guidelines for choosing a clean, dry, well-ventilated area with proper airflow.
Instructions for installing isolator pads on unit feet using self-tap screws.
Guidance on installing the air inlet filter at the pump's inlet connection.
General guidelines for installing air discharge and condensate piping.
Lists suitable and not recommended materials for compressor lubricant systems.
Advice on installing condensate lines, size, routing, and disposal regulations.
Details battery requirements, cable sizing, and connection procedures for gasoline units.
Explains constant speed control and pump filling procedures for gasoline engines.
Safety precautions for engine lubrication and fuel requirements.
Recommends Ingersoll Rand All Season Select synthetic lubricant for initial use.
Provides guidance on using comparable petroleum-based lubricants based on viscosity.
Information on continuous duty operation with synthetic vs. petroleum lubricants.
Step-by-step instructions for starting and safely shutting down the compressor.
Instructions for removing and installing the air filter element for SS3 models.
Instructions for removing and installing the air filter element for SS5 models.
Steps for draining old lubricant and refilling the compressor pump.
How to check and adjust belt tension and ensure pulley alignment for optimal performance.
Recommendation for periodic certified tank inspections and replacement warnings.
Exploded view diagram showing the components of the SS3 bare compressor pump.
Exploded view diagram illustrating the parts of the SS5 bare compressor pump.
Components included in the start-up kit for initial unit maintenance.
Information on the recommended synthetic compressor lubricant bottles.
Part numbers for air filter elements for SS3 and SS5 models.
Details on kits for common repair tasks like piston ring or valve replacement.
Recommended kit for preventing issues in low ambient temperatures.
Specifications for heavy-duty air hose assemblies designed for 300 PSIG.
Parts related to engine maintenance, including oil and air filters.
Outlines warranty periods for compressors, parts, and specific conditions.
Defines the exclusive remedies and limits on the company's liability.
