Ingersoll-Rand SSR UP5 11 User Manual

Ingersoll-Rand SSR UP5 11

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SSR UP5 11, UP5 15, UP5 18, UP5 22

50Hz

OPERATION AND MAINTENANCE MANUAL

This manual contains

important safety information

and must be made available

to personnel who operate and

maintain this machine.

2170000

50Hz UP5 11 –>

50Hz UP5 15 –>

2190000

2210000

50Hz UP5 18 –>

50Hz UP5 22 –>

2230000

SERIAL No :

SERIAL No :

SERIAL No :

SERIAL No :

C.C.N. : 22083737 GB

DATE : MAY 2002

GDSTP-24280-MAN-0001_P1

CP-1010-010, 020, 030

Goodnal STP ST041 Site Services (Ingersoll Rand Air Compressor UP5 11-22 50H OM Manual) Vendor Manual

Q-Pulse Id VM408

Active 29/10/2013

Page 1 of 40

Table of Contents

Other manuals for Ingersoll-Rand SSR UP5 11

Option Manual47 pages

Questions and Answers:

K
keytaraAug 10, 2025
Why does my Ingersoll-Rand Water Filtration System compressor trip due to over temperature?
- J
  jeremywellsAug 10, 2025
  The compressor may be tripping due to several reasons. It might be operating above the rated pressure, so set the pressure to the correct rating. The package pre-filter could be blocked, requiring cleaning or replacement. A blocked cooler, missing or incorrectly fitted enclosure panels, low coolant level (top up coolant and check for leaks), high ambient temperature (re-site compressor), or restricted cooling air flow (ensure correct air flow to compressor) could also be the cause.
J
Jonathan JonesAug 15, 2025
What to do if pressure relief valve opens on my Ingersoll-Rand Water Filtration Systems?
- C
  Candice WilliamsAug 15, 2025
  If the pressure relief valve opens, it could be due to a defective switch or incorrect pressure switch setting; in this case, replace the switch or set the pressure to the correct rating for the machine. Alternatively, there may be a minimum pressure valve malfunction (fit minimum pressure valve service kit), a defective load solenoid valve (fit load solenoid service kit), a defective blowdown valve (fit blowdown solenoid service kit), or an inlet valve malfunction (fit inlet valve service kit).
S
smithbryanAug 21, 2025
Why is my Ingersoll-Rand Water Filtration System consuming excessive coolant?
- A
  Adam BirdAug 21, 2025
  Excessive coolant consumption could stem from several issues: a separator cartridge leak (fit new separator cartridge), a blocked separator cartridge drain (remove fittings and clean), the compressor operating below rated pressure (set pressure to correct rating for the machine), or a coolant system leak (fix leaks).
M
Mark OdonnellAug 26, 2025
How to reduce excessive noise level in Ingersoll-Rand Water Filtration Systems?
- D
  Douglas MurphyAug 26, 2025
  Excessive noise levels may be due to air system leaks (fix leaks), a defective airend (change airend), belts slipping (replace belt and tensioner), a defective motor (replace motor), or loose components (retighten loose items).
K
Kevin WellsAug 30, 2025
Why is there black residue on the belt guard/cooler box of my Ingersoll-Rand Water Filtration System?
- J
  Jessica CookAug 30, 2025
  Black residue on the belt guard or cooler box could be caused by a slipping drive belt (replace belt and tensioner), misaligned pulleys (re-align pulleys), worn pulleys (replace pulleys and belt), or a failed gas strut (replace belt and tensioner).
D
Dawn RodriguezSep 5, 2025
What causes a shaft seal leak in Ingersoll-Rand Water Filtration Systems?
- R
  Ralph WhitakerSep 5, 2025
  A shaft seal leak is caused by a defective shaft seal. To resolve this, fit an Airend shaft seal kit.

Ingersoll-Rand SSR UP5 11 Specifications

General

Model	SSR UP5 11
Type	Rotary Screw Air Compressor
Manufacturer	Ingersoll-Rand
Category	Industrial Equipment
Power Source	Electric
Phase	3
Pump Type	Rotary Screw

Related product manuals

Ingersoll-Rand SSR UP5 15

Ingersoll-Rand EP 20-ESP

Ingersoll-Rand EP 25-ESP

Ingersoll-Rand EP 30-ESP

Ingersoll-Rand DA25IM DA40IM

Ingersoll-Rand DA70IM

Ingersoll-Rand DA100IM

Ingersoll-Rand DA200IM

Preview: Ingersoll-Rand PB35A

Ingersoll-Rand PB35A