23
6.1.2 Hardware Restored
Steps:
step 1:
find the RESET reset key on the device panel.
Step 2:
Hold down the RESET key for 10 seconds.
Step 3:
When you see the Status light on, release the RESET key;
Step 4:
After a few seconds when the Status lights go out, then re-hold the RESET key not release;
Step 5:
When you see the Status light flashing release the RESET key, indicating that the recovery factory
settings are successful.
6.2 Import/Export Configuration
Login to the WEB page, click on the "System>> Configuration Management" menu in the navigation tree
to enter the "configuration management" interface.
Figure 6-2 WEB interface restore factory settings
Click Browse to select the profile, and then click the Import button. After importing the configuration file,
restart the system to take effect.
Click Backup to export the configuration parameter file currently being applied and the exported file is. dat
format, default file name config.dat.
To Next Page
Loading...
