InHand IR615-S Series - Appendix B Instruction of Command Line

50
settings.
Appendix B Instruction of Command Line
1Help Command
Help command can be obtained after entering help or “?” into console, “?” can be entered
at any time during the process of command input to obtain the current command or help from
command parameters, and command or parameters can be automatically complemented in case
of only command or command parameter.
1.1 Help
[Command] Help [<cmd>]
[Function] Get help from command.
[View] All views
[Parameter]
<cmd> command name
[Example]
 Enter:
help
Get the list of all current available command.
 enter:
help show
Display all the parameters of show command and using instructions thereof.
2View Switchover Command
2.1Enable
[Command] Enable [15 [<password>]]
[Function] Switchover to privileged user level.
[View] Ordinary user view.
[Parameter]15 User right limit level, only supports right limit 15 (super users) at
current.
<password> Password corresponded to privileged user limit level, hint of password