Warning
The heat resistance varies in different components of the probe, DO
NOT put the probes directly in the fire frame. And probes are NOT
dishwasher safe. Please DO NOT put the teflon cable and the
connecting part (between the sensor and teflon cable) into the water.
Sensor
Teflon cable
With stainless steel mesh
(Length: about 115cm / 3.8ft)
300°C / 572°F
For instantaneous test
250°C / 482°F
For long-time monitoring
250
°C
/ 482
°F
For long-time monitoring
Annex I Accuracy Table of IBT-2X
Temperature Range
Accuracy
Centigrade Fahrenheit
0~6°C / 32~43°F
7~15°C / 44~59°F
16~30°C / 60~86°F
31~170°C / 87~338°F
171~190°C / 339~374°F
191~220°C / 375~428°F
221~250°C / 429~482°F
4°C
6°F
3°C
4°F
2°C 3°F
1°C 2°F
2°C 3°F
3°C
4°F
4°C
6°F
Non water-proof
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To Next Page
Loading...
