Inkbird IHT-2XP - Page 12

Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose ALM2 function.
Step 2: press or button to choose ON or OFF.
Step 3: press and hold button for 2 seconds to quit
and save changes. (All changes will be automatically
saved if there is no operation in 30 seconds.)
Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose TS2 function.
11
Alarm Value Setting for P2
(the External Probe 2)
Alarm Function for P2
(the External Probe 2)