EasyManua.ls Logo

InMode VOTIVA - Treatment Schedule

InMode VOTIVA
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Votiva Operator Manual DO607094B 41
12. Dark skin (V-VI) treat with the 24-pin coated tip, restrict energy, starting at
energy level 15 or lower, adding 5 levels each visit (every 3-4 weeks) to a
maximum of energy level 40 on soft tissue, preferably following bleaching
regimen.
13. Apply the FRACTORA Handpiece to the treated area ensuring a contact with firm
pressure to minimize discomfort, and press footswitch to deliver RF energy
14. Move Handpiece to the adjacent area and press footswitch again in the SINGLE
mode, or adjust the repetition rate to the speed you move the tip to adjacent site.
15. Move to adjacent areas with no overlapping of side-electrodes (30-50% overlap).
16. Occasionally, additional 1-2 passes may be applied to reinforce results on the full
area or on selected spots. Gaps may be treated after the full area is done.
17. The endpoint is substantial erythema and edema, visible ablative craters, and burnt
tissue smell often accompanied by tingling heat sensation.
Treatment Schedule
The number of treatment sessions depends on the individual patient and treatment
aggressiveness and may vary from 1-5 sessions. Treatments are typically repeated every
3-6 weeks.
It is recommended to schedule follow-up session 2-3 days after the treatment to ensure
safe healing process.
Treatment should be concluded when the results are satisfactory to the patient or
according to the physician's discretion. Generally, 3-5 sessions are needed for mild to
moderate depth settings. It is not typical to perform more than five consecutive sessions.
In some instances, 1-2 sessions may be sufficient.

Table of Contents

Related product manuals