EasyManua.ls Logo

InMotion Challenger - Specifications

InMotion Challenger
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
5.
Specifications
[1]: Typical range is obtained at full charge, with a load of 90kg, ambient temperature of 25° C, and riding at speeds of 20 to 40 km/h on a 󽗊at, paved road. The
range of the wheel is in󽗊uenced by factors such as temperature, tire pressure, road conditions, and riding habits (such as rapid acceleration and braking).
[2]: fully charged, 90 kg payload, 25° C, no wind, at the 󽗊at road.
[3]: fully charged, 90 kg rider get the data through a large amount of tests.
Specification
Items
Parameter
Basic specs
Model V13Pro
Dimension 579x268x731mm
Net weight Approx. 53.2kg
Requirement to Rider
Max. palyload 130kg
Required height 120-200cm
Recommended age 16-50 years
Performance
Typical range [1] Approx. 95-150km
Max. slope [2] Approx. 45°
Max. speed [3] 90km/h
IP rating IP55
Charging time Approx. 6h
Working Temperature -10℃ ~ 45
°
C
Storage Temperature -20℃ ~ 45
°
C
Battery
Intelligent BMS Over-charge, Over-temperature, Over-discharge, Over-current, Short circuit, Over-voltage
Rating Voltage (VDC) 126V
Capacity 3024Wh
Motor
Nominal power 4500W
Max.of power 10000W
Charger
Input Voltage (VAC) AC100-240V 50/60HZ
Output Voltage (VDC) 126V 5A
Other
Display 2.4 Inch touch-screen
Output ports USB+Type-C
Tire size 22 Inch air-󽗉lled low rolling resistance tire (Tire pressure is 40Psi or 2.8Bar)

Related product manuals