7 8
1.Open the protective cover. 2. Take out the damping regulator from accessories, insert it into the damping
adjusting port in the direction shown in the gure, turn the regulator, the
damping decreases counterclockwise, and increases vice versa.
Adjustment port
3. After adjustment, cover it tightly.
Scan to check out the how-to video
7.4 Damping Adjustment
For initial use, user can adjust the damper according to weight and preference as follows
7.5 Suspension Adjustment
There will be a certain gap when the shock absorbing parts are used for a long time. When the riding experience is aected, use the M3 wrench delivered with
the vehicle to adjust it. Reduce the gap by turning the M3 wrench clockwise, on the contrary, it increases.
To Next Page
Loading...
