InMotion Challenger - Page 8

6
Download the App in the following ways
1. Scan the QR code below
2. Search "INMOTION" in the Apple store or Google Play Store.
3. Visit www.inmotionworld.com/support/app
7.2 Download INMOTION APP
V13 supports Bluetooth 5.0 BLE. The BLE ID is V13-XXXXXXXX, where XXXXXXXX is the last 8 digits of SN.
Install the INMOTION App on your mobile device (iOS 8.0 and above or Android 4.4 and above supported) and follow the prompts to connect your V13.
For more functions, please visit the o󽗋cial website to download the latest version of INMOTION App user manual.
7.3 Air Springs
Before in󽗊ating, unscrew the red covers of the air springs at the bottom of the pedals, and then use the in󽗊ator delivered with the vehicle to in󽗊ate, refer to
the table below for air pressure. It is recommended to check the air pressure every 3 months.
Note:
Scan to check out the how-to video
Please in󽗊ate the built-in air spring before using this product, otherwise it may damage the product.
After powering o󽗈, lay the vehicle 󽗊at for 10 min and then in󽗊ate it as shown in the picture.
Weight - Barometer
Weight Air pressure
Under 60kg 80-120psi
60-70kg 120-130psi
70-80kg 130-150psi
80-90kg 150-180psi
90-100kg 180-200psi
100-130kg 200-220psi