7
2． When the symbol is displayed, it means that the measured temperature is
lower than or equal to the pre-set lower temperature limit. When the symbol
flashes, it indicates that value displaying on the screen now is the pre-set lower
temperature limit value.
3． When the symbol is displayed, it indicates that the instrument is in
Recording Mode and the temperature is being recorded.
4． When the symbol is displayed, it indicates that the instrument is in Wait
Mode. If the symbol is also displayed at the same time, it means that the
instrument has been set to temperature-rise start recording method. When the
measured temperature is higher than the pre-set value, it will change to
Recording Mode and start temperature recording. If the symbol is displayed
at the same time, it means that the instrument has been set to temperature-drop
start recording method. When the measured temperature is lower than the pre-
set value, it will change to Recording Mode. If both the symbol and the
symbol are displayed at the same time, it means both the temperature-rise and
temperature-drop start recording method are enabled.
5． When the symbol is displayed, it indicates that the instrument is in
Wait Mode, and the instrument has been set to time start recording method. As
soon as the pre-set time has been reached, it will change to Recording Mode
and start temperature recording.
6． When the symbol is displayed, it indicates that the instrument is in
Wait Mode. The instrument has been set to key start recording method. As long
as the button of the instrument is pressed and hold for longer than 3 seconds,
it will change to Recording Mode and start temperature recording.
7． When the symbol is displayed, it means that the temperature unit is
Fahrenheit.
To Next Page
Loading...