Need help?Do you have a question about the Innova 7111 Smart and is the answer not in the manual?
General| Internet Updateable | Yes |
|---|---|
| OBD2 Compatibility | Yes |
| ABS | Yes |
| SRS | Yes |
| Battery Reset | Yes |
| Oil Reset | Yes |
| Brake Reset | Yes |
| Live Data | Yes |
| Bluetooth | Yes |
| Display | Color LCD |
| Operating System | Custom OS |
| Connectivity | Bluetooth, USB |
| Power Supply | 12V DC |
| Supported Protocols | CAN |
Discusses compliance with FCC rules for digital devices.
Outlines ownership of intellectual property rights for products and services.
Details Innova's intellectual property protection through U.S. patents.
Informs about potential differences based on current software version.
Provides warnings regarding product exposure to certain chemicals.
Emphasizes reading all instructions and warnings for safety.
Explains color-coded icons used for safety alerts and warnings.
Details the physical buttons and ports of the diagnostic tablet.
Guides through the first-time setup of the tablet.
Explains the main interface and access to tablet functions.
Lists the hardware and software specifications of the diagnostic tablet.
Provides steps for connecting the tablet to the vehicle's DLC.
Describes automatic vehicle information retrieval via DLC connection.
Explains how to input or retrieve vehicle mileage.
Offers guidance on performing vehicle scans and general precautions.
Details the process of initiating an OBD2 scan on the vehicle.
Explains how to interpret and view the results of an OBD2 scan.
Defines the traffic light system for emissions test readiness.
Explains the Malfunction Indicator Lamp (MIL) DTC code and its meaning.
Describes how to view captured engine conditions during a fault.
Introduces Innova's report for verified fixes and parts cost.
Steps to generate a RepairSolutions2 report for enhanced data.
Guides on selecting a retailer and purchasing parts online.
Explains the status and color coding of vehicle emission monitors.
Shows how to view procedures required for monitors to run.
Lists all stored powertrain Diagnostic Trouble Codes (DTCs).
Lists all pending powertrain Diagnostic Trouble Codes (DTCs).
Lists all permanent powertrain Diagnostic Trouble Codes (DTCs).
Covers extra diagnostic functions beyond basic scans.
Details the process for clearing OBD2 Diagnostic Trouble Codes.
Accesses specific OBD test modes like I/M, O2 Sensor, and EVAP.
Views drive cycle procedures for emission monitors.
Retrieves O2 sensor test results for fuel efficiency and emissions.
Retrieves test results for emission-related powertrain components.
Performs an EVAP system leak test.
Allows viewing and recording of real-time vehicle data.
How to access and view live sensor data from the vehicle.
Instructions for recording live data streams for later analysis.
Accesses detailed vehicle identification and customer data.
Displays and allows editing of vehicle & customer details.
Shows VIN, YMME, Module No, Cal ID, and CVN for vehicle identification.
Lists identified vehicle modules and communication protocols.
Retrieves statistics for vehicle monitors' performance.
Personalizes vehicle scans by adding customer contact details.
Lists upcoming service intervals and required parts.
Lists potential future component failures based on historical data.
Provides lists of Technical Service Bulletins and recalls for the vehicle.
Initiates enhanced OEM-level diagnostics for specific modules.
Performs a comprehensive scan across all vehicle network modules.
Displays results from a complete vehicle module scan.
Focuses diagnostics on a single vehicle control module.
Retrieves and displays DTCs for a specific vehicle module.
Clears DTCs for a single selected vehicle module.
Displays live data parameters for a specific vehicle module.
Executes active tests on vehicle actuators and systems.
Runs diagnostic and calibration procedures for actuators/systems.
Clears all stored OEM Diagnostic Trouble Codes from the vehicle.
Re-runs a complete scan to get the latest diagnostic status.
Provides a full overview of vehicle health and readiness status.
Offers a quick summary of reported DTCs and system health.
Displays status of vehicle service items like battery and tire pressure.
Reports the status of dashboard warning lights (e.g., Airbag, TPMS, ABS).
Provides a comprehensive report with fixes and warranty info.
Guides on resetting the oil maintenance indicator light.
Details procedures for resetting the battery monitor system.
Explains procedures for EPB reset, varying by vehicle.
Guides on calibrating the steering angle sensor for specific vehicles.
Allows viewing transmission fluid temperature readings.
Provides instructions for bleeding the ABS system.
Checks vehicle battery and alternator system performance.
Performs a charging system test to evaluate the alternator.
Checks battery health for electric and hybrid vehicles.
Lists past scan records with key details for retrieval.
How to view details of previously saved scan reports.
Options to email or print saved scan reports.
Allows playback and analysis of recorded live data streams.
Contacting Innova's technical team via email for assistance.
Guides on setting the tablet's date and time.
Specifies the preferred retailer for parts recommendations.
Connects the tablet to a Wi-Fi network for full feature access.
Configures display units to US Imperial or Metric.
Sets the tablet's display language to English or Spanish.
Adjusts the time before the tablet enters standby mode.
Adjusts the tablet's speaker volume level.
Adjusts the display screen's brightness.
Helps find the vehicle's Data Link Connector (DLC) location.
Changes the appearance theme of the tablet screens.
Displays software, tool, and firmware versions.
Records and sends issue logs to Innova's Technical Team.
Downloads and displays the tablet's user manual PDF.
Accesses tool definitions and Diagnostic Trouble Codes (DTCs).
Explains LED status for smog check and I/M program.
Defines icon status color coding and provides usage tips.
Searches for Diagnostic Trouble Code definitions for vehicles.
Connects with Innova's technical team for assistance.
Outlines the one-year manufacturer's warranty terms and conditions.
Provides contact information for ASE certified technical support.
Defines terms and acronyms related to OBD2 systems.
Explains the diagnostic programs monitoring vehicle systems.
Details monitors that constantly check system operation.
Details monitors that test systems once per trip.
Lists and defines common abbreviations and technical terms.
To Next Page
