To Next PageTo Next Page
Need help?Do you have a question about the Innova SDS-Tech SDS50 and is the answer not in the manual?
General| Category | Diagnostic Equipment |
|---|---|
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Protocols | ISO9141, KWP2000, CAN |
| Functions | Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test |
| Model | SDS-Tech SDS50 |
| Update | Via USB |
Details the main menu structure of the diagnostic tool, including access to various diagnostic functions.
Explains the meaning of the green, yellow, and red status LEDs for emissions testing and system readiness.
Information on the USB port for charging the diagnostic tablet before first use.
Instructions for powering the device on and off by pressing and holding the power button.
Guide to finding the vehicle's Data Link Connector (DLC) port for diagnostic connections.
Access to 10 OBD2 modes, including reading/erasing DTCs, viewing live data, and emissions readiness.
Access to enhanced OE-level diagnostics for ABS, Airbag, Transmission, and other modules.
Perform dealer-level service functions like Oil, Battery, EPB, SAS, and ABS bleeding.
Retrieve saved vehicle diagnostic reports and play recorded Live Data streams.
Setup Wi-Fi network, check for software updates, and configure personal options.
Access DTC library, definitions, Smog Check LEDs, and obtain technical customer support.
Guide to downloading the RepairSolutionsPRO app, creating an account, and pairing the tool.
