What causes an inverter overload fault in Innova OnLine and how to fix it?
An inverter overload fault in your Innova UPS is due to an overload. To resolve this, check the connected loads, remove non-critical ones, and inspect for any failed loads.
General| Frequency | 50/60Hz |
|---|---|
| Operating Temperature | 0-40°C |
| Output Voltage | 220/230VAC |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Interface | USB, RS232 |
| Humidity | 0-90% non-condensing |
Safety instructions for installing the UPS unit by qualified personnel.
Safety precautions during UPS operation, including mains cable and earth connections.
Warnings regarding hazardous voltages and servicing by qualified personnel.
Guidelines for transporting and storing the UPS in its original packaging.
Lists safety and EMC standards applicable to the UPS product.
Highlights key features like double-conversion technology and output power factor.
Details input and output voltage, frequency, and power ratings.
Specifies temperature, humidity, and altitude limits for operation.
Provides backup time estimates for different load percentages.
Lists physical dimensions and net weight for different models.
Instructions on moving, unpacking, and inspecting the UPS for damage.
General installation notes regarding ventilation, condensation, and mounting brackets.
Cable cross-section and protective device specifications for installation.
Step-by-step guide for connecting external battery packs to the UPS.
Explanation and connection of the Emergency Power Off (EPO) port.
Describes the UPS control panel, LCD, and LEDs for status indication.
Details various operating modes like Line, Battery, Bypass, and HE mode.
Procedures for powering the UPS on and off, with and without utility power.
Explains navigation through menus and submenus on the UPS LCD display.
Introduction and setting instructions for the High Efficiency (HE) mode.
Introduction and setting instructions for the Converter mode.
Explains N+X redundancy and parallel connection of UPS units.
Lists problems, possible causes, and remedies for warning indications.
Lists problems, possible causes, and remedies for fault indications.
Addresses issues without specific indication, and provides info for service calls.
Details USB, dry contact, and intelligent slot interfaces for communication.
Information about WinPower monitoring software and its installation.
To Next Page