Need help?Do you have a question about the innovair UV36C2DB1 and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| Frequency (Hz) | 60 |
| Cooling Capacity (BTU/hr) | 36000 |
| Voltage (V) | 208/230 |
| Refrigerant | R410A |
Criteria for selecting the indoor unit's location, ensuring structural support, proper drainage, and good air circulation.
Criteria for outdoor unit location, focusing on support, proximity, noise, maintenance access, and weather protection.
Selecting and checking the suitability of the location for the outdoor unit, observing clearance requirements.
Guidance on installing the outdoor unit on the ground or roof, ensuring proper support and ventilation.
Details the steps for connecting refrigerant pipes, including measuring, cutting, flaring, and insulating.
Testing water discharge functionality in natural and pump drainage modes, checking pump operation and drainage.
Explains the purpose of vacuum drying to eliminate moisture and non-condensable gases.
Key considerations for electrical wiring installation, including qualified electricians and grounding.
Points to confirm before conducting the test operation, ensuring all installations are complete and correct.
Procedure for testing the indoor unit's functions and performance after installation.
Procedure for testing the outdoor unit's operation, checking for noise and leaks.
To Next Page