Need help?Do you have a question about the Innovaphone IP240 and is the answer not in the manual?
General| Expansion module support | Yes |
|---|---|
| Ethernet LAN (RJ-45) ports | 2 |
| Power supply | 6 W |
| Power requirements | 12V |
| Speakerphone | - |
| Handset type | Wired handset |
| Product type | IP Phone |
| Product color | Black |
| Front camera | No |
| Display resolution | 128 x 64 pixels |
| Lines quantity | - lines |
| Phonebook capacity | - entries |
| Supported network protocols | PPPoE, PPTP, NAT, H.323-NAT, RSTP, IEEE 802.1x, NTP |
| Number of handles included | 1 pc(s) |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Flash memory | 8 MB |
| Internal memory | 16 MB |
Provides a comprehensive overview of the telephone's features and operating instructions.
Explains how to operate and administer the IP240 telephone using various keys.
Describes the symbols and information shown on the IP240 telephone display.
Details how to establish two simultaneous connections for calls or conferences.
Explains how to put calls on hold and retrieve them.
Covers automatic call back features for busy lines or no replies.
Explains how to manage multiple calls simultaneously.
Explains how to assign and use function keys for faster operation.
Covers sending text messages to other subscribers via the IP telephone.
Details how messages are received and displayed in different phone states.
Guides on accessing and managing incoming text messages.
Explains how to set up an automatic "Out of Office" message for callers.
Allows users to be available even when absent by diverting calls.
Explains how to manage incoming calls by setting responses like Ringing off, Silence, Busy, or Out of Office.
Allows control of call waiting behaviour during an active telephone call.
Describes how to enable or disable the display of the caller's number for outgoing calls.
Explains how to connect, switch, and manage headset operations for the IP240.
Details how to configure and use direct dialling for faster call initiation.
Provides instructions on how to lock the IP telephone and unlock it using a PIN.
Explains the process for changing the telephone's Personal Identification Number (PIN) for security.
Details how to access serial number, firmware, and boot code version numbers.
Covers network configuration settings like DHCP Mode, IP Addresses, and VLAN.
Provides information on registering with the gatekeeper and associated settings.
Explains how to reset the device to its factory default configuration.
To Next Page
