Do you have a question about the InnovaSpa Olexia and is the answer not in the manual?
Precautions to prevent electrocution risks, including appliance placement.
Safety measures for supervising children and securing the spa cover.
Advice on avoiding overheating, including medical conditions and substance use.
Specific safety guidelines for pregnant users regarding water temperature and duration.
Guidance on selecting a suitable location and surface for outdoor spa placement.
Requirements for indoor spa installation, including ventilation and doorway size.
How to control the spa pump speed for different functions and intensities.
Adjusting jet intensity and air mix for optimal massage experience.
Information on the operation and function of the ozone or UV water cleaning system.
Operating the waterfall and lighting features of the spa.
Instructions for cleaning and maintaining the spa cabinet's exterior.
Detailed steps for cleaning and maintaining the spa's filter cartridge.
Procedures for draining, cleaning, and refilling the spa water.
Guidelines for cleaning and protecting the spa cover.
Recommendations for preparing the spa for winter to prevent damage.
Important considerations and recommendations for filling the spa with water.
Overview of the main categories of spa chemicals and their general purpose.
Explanation of alkalinity and pH parameters for maintaining balanced spa water.
Information on specialty chemicals used for occasional water problems and maintenance.
Overview of bromine, lithium hypochlorite, and biguanide sanitizers for spas.
How mineral purifiers work to kill bacteria and viruses in spa water.
The importance and procedure of shock treatment after spa use.
Resolving issues related to circuit breaker trips and no spa power or operation.
Diagnosing and fixing problems with water flow to jets and continuous pump operation.
Addressing spa overheating and rapid water level drops.
Procedure to remove trapped air from an air-locked spa pump.
Troubleshooting overheat (OH) and unknown temperature (HH) diagnostic codes.
Actions for ice condition (IC), sensor failures (SA, SB), and sensor balance (SN) codes.
Diagnosing flow (HL, LF) and heater/water (DR, DY) related diagnostic codes.
Details of the 5-year warranty covering the interior acrylic spa surface.
Details of the 1-year warranty for electrical equipment, plumbing, and accessories.
Information on warranty service, exclusions, limitations, and disclaimers.