Inovance H3U Series - Terminal Functions and Specifications

3 Wiring
- 15 -
3.1.2 Functions of Terminals
Function Terminals Remarks
Power input L, N, PE
To the two-phase AC power
supply, 85-264 VAC, 220
VAC(Rated)
Power
output
24V, 0V
Provide +24 VDC power supply
externally. Usually, it provides
power
supply to DI/DO terminals and
external sensors.
Max. output current: 350 mA.
Normal
transistor
NPN output
Y00-Y03 on H
3U
-0808PMRTA
Y05-Y17 on H
3U
-1616MR/T
Y05-Y17 on H
3U
-2416MR/T
Y05-Y27 on H
3U
-3624MR/T
Y05-Y37 on H
3U
-3232MR/T
Open-collector, optical coupling
isolated.
Circuit power voltage: 5 to 24 VDC.
Max. output current: Resistive
load: 2 A/1 point; 8 A/4 point
common terminal; 8 A/8 point
common terminal;
Inductive load: 220 VAC, 80 VA;
Lamp load: 1.5 W/24 VDC;
Hi-speed
transistor
NPN output
Y00-Y04 on H
3U
-1616MR/T
Y00-Y04 on H
3U
-2416MR/T
Y00-Y04 on H
3U
-3624MR/T
Y00-Y04 on H
3U
-3232MR/T
Open-collector, optical coupling
isolated.
Circuit power voltage: 5 to 24 VDC.
Max. output current: Resistive
load: 0.5 A/point; 0.8A/4 points;
1.6A/8 points;
Inductive load: 12 W/24 VDC;
Lamp load: 1.5 W/24 VDC;
Max. frequency: 200 kHz(each
channel)
Relay output
Y04-Y07 on H
3U
-0808PMRTA
Y00-Y17 on H
3U
-1616MR/T
Y00-Y17 on H
3U
-2416MR/T
Y00-Y27 on H
3U
-3624MR/T
Y00-Y37 on H
3U
-3232MR/T
Circuit power voltage: Below 250
VAC, 30 VDC
Relay mechanical insulation ;
Max. output current: Resistive
load: 0.5 A/point; 0.8 A/4 points;
1.6 A/8 points;
Inductive load: 12 W/24 VDC;
Lamp load: 220 VAC, 100 W
Hi-speed
di󶍽erential
output
(FPx+, FPx-) and (RPx+, RPx-)
on H
3U
-0808PMRTA
Max. frequency: 500 kHz
Output voltage: ±5 V (3.1 V when
the load is 100 Ω)