To Next PageTo Next Page
Need help?Do you have a question about the Inovance H5U Series and is the answer not in the manual?
General| Series | H5U |
|---|---|
| Category | Controller |
| Operating Voltage | 24V DC |
| Protection Class | IP20 |
| Type | PLC |
| Communication Ports | Ethernet, CAN |
| Programming Language | Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), Instruction List (IL), Sequential Function Chart (SFC) |
| CPU | 32-bit |
Overview of the H5U series PLC and user guide's purpose.
Identifies target users and guidance for first-time users.
Records changes made to the document over versions.
Essential safety guidelines for handling the equipment.
Explains hazard indicators like DANGER, WARNING, and CAUTION.
Safety considerations for integrating the PLC into control systems.
Critical safety advice for installation and wiring procedures.
Safety guidelines for using, maintaining, and disposing of the PLC.
Details of PLC models and their identification plates.
Identifies and describes the PLC's external connection ports.
Lists general technical specifications of the PLC.
Detailed electrical and functional specifications for PLC inputs and outputs.
Provides physical dimensions and exterior views of the PLC.
Illustrates PLC terminals and provides wiring precautions.
Shows internal circuits for input and output signal processing.
Guidelines for selecting, preparing, and connecting communication cables.
Details on connecting and configuring EtherCAT communication.
Information on setting up CANopen/CANlink communication networks.
Configuration and wiring for RS485 serial communication.
How to connect the PLC for Ethernet monitoring.
Procedures for starting and stopping the PLC.
Guidelines for replacing the PLC's backup battery.
Explains status indicators, MFK key, and IP restoration.
Details on programming via microSD and interpreting CPU LED error codes.
Outlines the terms and conditions of the product warranty.
Information and fields for filling out the product warranty card.
