Inovance H5U Series - Operation, Maintenance, and Disposal Safety

4
CAUTION
◆ Cut o󶍽 the main power supply before connecting the power supply of the equipment. Failure
to comply may result in electric shock.
◆ The input power of the equipment is DC 24V. Therefore, check regularly that the DC power
provided by the switching-mode power supply unit is stable.
Operation and Maintenance
CAUTION
◆ During use, pay attention to PLC protection, perform touch operations by hand, and avoid
touching the display panel by using tools. The user shall be responsible for panel damage
caused by excessive external force.
◆ Lithium batteries and capacitors may contain ingredients that are harmful to health and
pollute the environment. Treat scrapped controllers as industrial waste.
◆ Lithium batteries needs to be replaced by a professional.
☞ Safety Recommendations
◆ In positions where the operator directly contacts the machinery part, for example, where a
machinery tool is loaded and unloaded or where a machine runs automatically, the onsite
manual devices and any other alternative means must be carefully arranged and designed so
that they are independent of the PLC and can start or terminate the automatic running of the
system.
◆ If programs need to be modi󶍾ed when the system is running, apply a lock or take any other
necessary measures to ensure that only authorized personnel can perform such modi󶍾cation.
Disposal
CAUTION
◆ Treat scrapped controllers as industrial waste. Dispose of the battery according to local laws
and regulations.