In case of difficulty, call the Insafe Helpdesk on 0800 526388
Deleting 02 User Code
Press #56 to enter Delete User Mode
Input Manager code (01-xxxxxx) followed by 02
Press purple button. The keypad will beep and flash
green 3 times. 3 low beeps and 3 red LED flashes will
indicate code not deleted.
# 5 6
0 1 X X X X X X
0 2
Wrong Try Penalty
The entry of four consecutive invalid combinations will start a 5-minute
penalty period. The keypad will not operate during this period.
Changing Batteries
1. Remove battery box located at the bottom of the keypad by pressing the button.
The spring-loaded mechanism will partially eject the battery pack out of the keypad.
2. Remove old batteries and install new 9 vdc ALKALINE only,
e.g. Energizer or Duracell batteries.
3. Reinstall battery pack.
Insafe International Limited
Insafe House Decimus Park Kingstanding Way Tunbridge Wells TN2 3GP
Telephone 01892 533 000
I N SAFE .CO M
S A L E S & S E R VIC E • S A L E S @ INS A F E . C O.U K
080 0 5 2 6 3 8 8
To Previous Page
Loading...
