G SERIES PILOT’S GUIDE .
INSIGHT INSTRUMENT CORPORATION BOX 122, FORT ERIE, ONTARIO, L2A 5M6
4
Warranty and Service
The Insight Instrument Corporation 610C Graphic Engine Monitor system (G3-4) is warranted against
defects in materials and workmanship for two years and 3 years for G4 from date of purchase.
Insight temperature probes are warranted for one year or 1000 hours which ever comes first.
Insight will at its option repair or replace without charge those products that it finds defective.
Insight will not be responsible for repairs required by improper installation, unauthorized maintenance
or abuse.
No other warranty is expressed or implied. Insight is not liable for consequential damages.
Technical Support
If you have difficulty installing or using a GSeries system, please
read the documentation.
Every GSeries system is shipped with complete instructions for
installation and use.
The answers to many technical questions can be found in this
booklet, or the GSeries Installation Manual.
Insight provides customer support free of charge for as long as
you own the instrument.
If you have any questions concerning GSeries operation do not
hesitate to call.
The Customer Service department accepts calls Monday through
Friday between 9 am and 5 pm EST. Be sure to have your in
-
strument model number and serial number(s) ready when you
call.
Insight Start Splash Screen
G Series Pages & Functions
Turned On:
G1-2-3-4 YES Main Screen
G2-3-4 YES Lean of Peak Screen
G2-3-4 YES Rich of Peak Screen
G1 YES Lean Screen (Basic)
G1-2-3-4 YES Probe Diagnostic Screen
G3-4 YES Temperature Variation Screen
G3-4 YES Vibration Analysis Screen
G3-4 YES Take-Off G Force Screen
G3-4 YES Two Axis Turbulance Screen
G3-4 YES Live Dynamic G-Force Screen
G3-4 YES Last Triggered Snapshot Screen
G3-4 YES Theoretical Horsepower Screen
G3-4 YES TAS-1000 Air Data Screen
G2-3-4 YES User Configuration Screen
G2-3-4 YES Fuel Onboard Screen
Insight Start Splash Screen
To Next Page
Loading...
Need help?
General
