Insignia Diamond Series - Steam Generator Connections; Steam Outlet and Water Inlet

www.insigniashowers.com Last Modied: 17/05/2021
30
The steam generator has 3 connecons.
1. Steam Outlet: Connect the white insulated hose to the steam system within your shower as shown in
image A. Make sure these are ed in the correct posion as they are only aached for
transportaon reasons only.
2. Water Inlet: When installing the water line for the steam generator, there are 2 opons available:
• Purchase Insignia’s WRAS approved braided hoses—dierent packs are available for dierent shower
types.
• Install a stac water line from the shower valve (middle feed) to the steam generator. Even with a stac
water line, exible hosing will sll be required for the hot and cold water feeds. If you choose this opon,
please ensure you purchase the correct hose pack from www.insigniashowers.com
3. Drain: See next page
Steam Generator Connections (steam version only)
2
1
3
White Insulated Pipe
Steam Pod
A
Steam
Generator