Insignia Diamond Series - Steam Generator Drain Connection

www.insigniashowers.com Last Modied: 17/05/2021
31
Steam Generator Connections
3. Drain: A— Ensure this is facing the steam generator and is ghtened fully, then take
the hose connected to the steam drain and trim to a desired length. (Image 1)
Once trimmed, connect the hose to (A) (Image 2) and secure in place with a jubilee clip
from the screw pack contents.
Drill Out the spigot (Image 3) on the waste and connect a hose from your accessory box
from the spigot (C), to (B) and ghten using the jubilee clip provided.
A
1
2
NOTE: MUST DRILL OUT
B
C
3