Why Dolby Digital or DTS sources cannot be played on Insignia Amplifier?
If Dolby Digital or DTS sources cannot be played on your Insignia Amplifier, ensure that the connected component is set to output Dolby Digital or DTS digital signals. Refer to the component's operation instructions for the appropriate settings. Also, select an appropriate digital input source using the input selector buttons.
What to do if Insignia Amplifier sound suddenly goes off?
If the sound from your Insignia Amplifier suddenly goes off, it could be due to a short circuit activating the protection circuitry. Check that the speaker wires are not touching each other, and then turn the unit back on. Alternatively, the sleep timer might have turned the unit off; in that case, turn the power back on and play the source again. Also, ensure that the unit is not muted by pressing the MUTE button.
Why is there no sound coming from my Insignia Amplifier?
If there is no sound from your Insignia Amplifier, several factors could be the cause. Check if the input or output cable connections are correct, and reset the unit. Ensure that you've selected the appropriate input source using the INPUT, 6 CH INPUT, or the input selector buttons. Also, verify that the speaker connections are secure and that the volume isn't turned down or muted. Lastly, make sure the source you're playing can be reproduced by the unit.
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Type | Hybrid Tube Amplifier |
| Input Impedance | 47k Ohms |
| Power Supply | AC 120V, 60Hz |
| Impedance | 8 Ohms |
| Inputs | RCA |
| Outputs | Speaker terminals |
| Power Output | 40W per channel |
Lists all the items included in the package with the receiver unit.
Explains how to connect external audio and video devices to the receiver.
Details the process of connecting digital audio sources like optical and coaxial.
Instructions on how to connect speakers to the receiver unit.
How to configure speaker settings like size (Large/Small) and presence (None).
How to fine-tune the volume level for each individual speaker.
Using test tones to automatically balance speaker output levels for optimal listening.
How to choose audio/video sources and manage multiple video devices.
Provides solutions for common problems like unit failure, no sound, or display issues.
Troubleshooting tips for tuner reception problems and remote control malfunctions.
Procedure to reset all unit parameters to their factory default settings.
To Next Page
