4. When you are finished, eject the device from within Windows before unplugging the cable.
Understanding the Basics
Turning your tablet on or off
To turn on your tablet:
Press and hold (power) until your tablet turns on.
To turn off your tablet:
1. Press and hold (power) until the Power off screen opens.
2. On the Power off screen, touch Power Off, then OK to turn off your tablet.
To turn the screen on or off:
Press (power). The screen turns off and your tablet enters standby mode.
Press (power) again to turn the screen back on.
Unlocking and relocking your tablet
When you turn on your tablet, the device is locked. You need to unlock the device to be able to use it.
To unlock and relock your tablet:
1. When you turn on your tablet and the initial screen appears, slide the lock icon to the right.
2. To relock your tablet, briefly press (power).
Resetting the hardware
If your tablet becomes unresponsive, you can perform a hardware reset by inserting a paper clip or pin into the RESET hole on the back of your
tablet, then turn on your tablet again. Your stored data will not be affected.
Adjusting the volume
To adjust the volume:
To Next Page
Loading...
