EasyManua.ls Logo

Insignia NS-22D420NA18 - Page 68

Insignia NS-22D420NA18
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
NS-22D420NA18
www.insigniaproducts.com
Double images.
Use a highly directional outdoor
antenna or use a cable or satellite
box.
The picture has
a few bright or
dark spots.
A few bright or dark spots on an LCD
screen is normal. It does not affect
the operation of your TV.
Video
description or
voice guide
does not work.
Make sure that your TV is not muted
and the volume is turned up.
Make sure that the options listed
under the Accessibility menu are
turned on. See Adjusting
accessibility settings on page 62.
Video descriptions are not available
on all broadcasts.
Some remote functions are not
narrated.
Problem Solution
Good picture,
but no sound.
Increase the volume.
Make sure that the sound is not
muted.
Make sure that you do not have
headphones connected. When
headphones are connected, no
sound comes from the TV speakers.
Change to a different audio mode.
See the Audio Mode option in
Adjusting sound settings on
page 46.
If you are using a home theater
system, soundbar, or external
speaker system, make sure that it is
turned on and is not muted.
If you are using a home theater
system, soundbar, or external
speaker system, make sure that you
have selected the correct output
mode.
If you are using a home theater
system, soundbar, or external
speaker system and have connected
it with a digital audio cable, select
Digital Audio Format/Audio Delay
on the Audio menu, then set Audio
Format to PCM. See the Digital
Audio Format/Audio Delay option
in Adjusting sound settings on
page 46.
Make sure that the audio cables are
connected correctly and securely to
your TV.
Make sure that the antenna or cable
TV is connected correctly and
securely. See Connecting a cable or
satellite box on page 16 or
Connecting an antenna or cable TV
(no box) on page 19.
If you are using an antenna, the
digital channel signal may be low. To
check the digital channel signal
strength, see Checking the digital
signal strength on page 52.
If you are using an antenna and the
signal strength is low, adjust the
antenna or use a highly directional
outdoor antenna or set-top antenna
with a built-in amplifier.
The audio cables you are using may
be bad. Try a new set.
Poor picture.
Make sure that the room is not too
bright. Light reflecting off the
screen can make the picture difficult
to see.
If an S-VHS camera or a camcorder is
connected while another connected
device is turned on, the picture may
be poor. Turn off one or more
devices.
Problem Solution

Table of Contents

Other manuals for Insignia NS-22D420NA18

Related product manuals