32
NS-32D311NA17 / NS-32D311MX17
www.insigniaproducts.com
Finish the wizard
14 Press
S or T to highlight Cable / Satellite Box,
Cable from the wall, or Antenna, then press
ENTER.
•If you select Cable / Satellite Box, a screen
opens that shows you the ways you can connect
the box.
Press ENTER.
•If you select Cable from the wall or Antenna,
your TV starts scanning for channels and
displays a progress screen.
15 Press ENTER to close the wizard. If you selected:
• Cable from the wall or Antenna, your TV tunes
to the first channel it found in the scan.
• Cable/Satellite box, press INPUT to open the
INPUT SOURCE list, press
S or T to select the
video input (HDMI or AV) you connected the
box to, then press ENTER. Your TV switches to
the input you selected.
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
To Next Page
Loading...
