AA
A
++
AA
A
+
AUDIO/VIDEO OUT
SOUNDBAR
OPTICAL
AUDIO IN
AUDIO IN
L
R
DIGITAL
OPTICAL
OUTPUT
HDHD
ANT/CABLE
ETHERNET
HDMI1
(ARC)
HDMI2
HDMI3
ETHERNET
AV IN
VIDEO
AUDIO
LR
/
AUDIO OUT
VIDEO
Q4 screws
(16 mm length) (4 pcs.)
AV IN
VIDEO
AUDIO
LR
ANT/CABLE
ETHERNET
AUDIO OUT
DIGITAL
OPTICAL
OUTPUT
HDMI3
HDMI2
HDMI1
(ARC)
USB
DC 5V 0.9A
SOUNDBAR
Power/Input button
Press to turn your TV on or o manually.
When your TV is on, a short
press changes power menu and
a long press turns o your TV.
Power indicator
Remote control
sensor
QUICK SETUP GUIDE
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
STOP
Before using your new TV, read these
instructions to prevent any damage.
Do not plug the power cord in until all
other devices have been connected.
VESA Mounting Pattern
100 × 100 mm
Screws: type M4, 16 mm to
20 mm length depending
on the wall mount
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
STANDS
1 Align the TV stand screw
holes with the holes on
your TV’s bottom.
2 Use a Phillips screwdriver
and the four provided
screws to secure the
stands to your TV.
1
INSTALLING THE STANDS OR A WALL MOUNT
Place your TV face-down on a cushioned, clean surface.
HDMI (best video quality)
AV (good video quality)
You can use the DIGITAL OPTICAL
OUTPUT jack or the HDMI1 (ARC)
jack.
Note: If you need to change the digital
audio format, go to the Home menu,
select Settings, then select Display &
Sounds. Select Audio Output, then
select Digital Audio Format and
change the setting to PCM or your
preferred audio format.
Note: You can use a wired Ethernet connection to
access the internet instead of a Wi-Fi connection.
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
ANALOG
DIGITAL
2
Coaxial (good video quality)
ETHERNET (optional)
Connect an antenna to
access live over-the-air TV.
MAKING CONNECTIONS
Note: You can use the
HDMI1 (ARC) jack to
connect a digital
audio system.
TV stands
Power cord
Note: Images do not necessarily represent the exact design
of your television.
Final flat size: 23.38 × 16.52 in. / 593.85 × 419.61 mm
Fold size: 11.69 × 8.26 in. / 296.925 × 209.805 mm
NS32F201NA23
32"
HD
60Hz LED TV
FEATURES
C
M
Y
CM
MY
CY
CMY
K
NS-32F201NA23_21-1031_QSG_V1_EN_Final.ai 1 12/27/2021 2:05:10 PMNS-32F201NA23_21-1031_QSG_V1_EN_Final.ai 1 12/27/2021 2:05:10 PM
To Next Page
Need help?
General
