Why does my Insignia NS-32E321A13 cabinet creak?
If your Insignia LED TV cabinet creaks, when the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.
Why don't the control buttons work on my Insignia NS-32E321A13?
If the control buttons on your Insignia LED TV do not work, ensure that the Button Lock option is set to Off. If that doesn't work, unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
Why does my Insignia NS-32E321A13 keep turning off?
If your Insignia LED TV keeps turning off, make sure that the sleep timer is not turned on.
Why does my Insignia LED TV have good picture but no sound?
If your Insignia LED TV has good picture but no sound, try increasing the volume and making sure that the sound is not muted. Also, ensure headphones are not connected, as this will prevent sound from coming out of the TV speakers. Verify that the correct audio mode is selected, and the audio cables, antenna, or cable TV are securely connected. A bad audio cable may also be the cause, so try a new set. If you are using an antenna, the digital channel signal may be low.
Why is the picture dark on my Insignia NS-32E321A13 LED TV but the sound is fine?
If your Insignia LED TV has a dark, poor, or no picture (but the screen is lit) and the sound is good, try switching to another channel as the station itself may be experiencing issues. Ensure that your antenna or cable TV is securely connected. Adjust the brightness and make sure the correct picture mode is selected. If you're using an antenna, the digital channel signal may be weak, so adjust the antenna or use a better one with an amplifier. Also, ensure your video cables are securely connected or try a new set of video cables.
Why does my Insignia NS-32E321A13 have no power?
If your Insignia LED TV has no power, make sure that the power cord is correctly connected to both the TV and a working power outlet. If it is, unplug the power cord, wait 60 seconds, then plug it back in and turn on your TV. Other devices (like a surround sound receiver, external speakers, fans, or hair dryers) may also interfere with your TV's power, so try turning them off one at a time to see if that resolves the issue.
Why is there audio noise coming from my Insignia NS-32E321A13?
If you are experiencing audio noise with your Insignia LED TV, other devices (such as a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing the interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
Why is there no sound from one speaker on my Insignia LED TV?
If there is no output from one of the speakers on your Insignia LED TV, adjust the audio balance. Also, ensure that the audio cables are connected correctly and securely to your TV.
Why are there after images on my Insignia NS-32E321A13?
If after images appear on your Insignia LED TV, avoid displaying a still image, such as a logo, game, or computer image, for an extended period of time, as this can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.
How to fix double images on Insignia LED TV?
If your Insignia LED TV displays double images, use a highly directional outdoor antenna, cable TV, or satellite TV.
Safety tips for TV placement and use to prevent injury.
General safety warnings, electrical hazards, handling, and power source advice.
Adjusting picture settings like brightness, contrast, and color.
Customizing audio settings like sound mode and balance.
How to set or change the parental control password.
Solutions for picture and sound problems.
Solutions for remote control issues.
Solutions for power and signal error messages.
To Next Page
General