4
NS-32E321A13 Insignia 32" LED TV
www.insigniaproducts.com
Insignia 32" LED TV
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-32E321A13 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.
INlink
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page 39
for
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the base to the stand column with the
four provided screws.
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, remove the four screws
that secure the stand column to the TV, then
remove the stand column.
3 Secure the flat stand cover to the back of your
TV using the four screws you just removed.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
T4 25 mm 4
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous
” on page 48.)
Stand
Flat stand
cover
To Next Page
Loading...
Need help?
General