M
Matthew OwensSep 5, 2025
How do I fix double images on my Insignia TV?
- TTammy ButlerSep 5, 2025
If you are seeing double images on your Insignia TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
To Next PageTo Next Page
How do I fix double images on my Insignia TV?
If you are seeing double images on your Insignia TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
How to fix Insignia NS-40D40SNA14 remote not working?
If your Insignia TV remote isn't working, ensure the power cord is correctly connected to the TV and a power outlet. Also, make sure there are no obstructions between the remote and the TV's sensor. Point the remote directly at the sensor, verify the batteries are correctly installed, and replace dead batteries with new ones.
What to do if my Insignia NS-40D40SNA14 says no signal?
If your Insignia TV displays a 'No Signal' error message, press the INPUT button to select the correct input for your device. If using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input on your TV to view those channels.
Why does my Insignia TV have good picture but no sound?
If your Insignia TV has good picture but no sound, first increase the volume and make sure the sound isn't muted. Ensure headphones are disconnected, as they disable the TV speakers. Verify the correct audio mode is selected and that all audio cables are securely connected. Also, confirm that your antenna or cable TV is properly connected. If using an antenna, check the digital channel signal strength. A bad audio cable may also be the cause, so try a new set.
Why is there no picture or sound on my Insignia NS-40D40SNA14?
If your Insignia TV displays no picture and no sound, try the following: First, press the power button on the TV or remote. Ensure the Audio Only option is set to Off. Check that all video cables are securely connected. Adjust the contrast and brightness settings. Make sure the power cord is plugged in, the correct video input source is selected, and try another channel in case the station is experiencing issues. Confirm the incoming signal is compatible, and that the antenna or cable TV is properly connected. Finally, check the closed caption settings, as some TEXT modes can block the screen.
Why is the picture dark on my Insignia TV but the sound is good?
If your Insignia TV displays a dark, poor, or no picture but the sound is good, try switching to another channel as the station may be experiencing problems. Also, ensure that the antenna or cable TV is connected correctly and securely. Adjust the brightness and make sure that the correct picture mode is selected. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Make sure that the video cables are connected securely to your TV and if the video cables are bad, try a new set.
Why are there no channels on my Insignia NS-40D40SNA14 after auto channel search?
If, after performing an Auto Channel Search on your Insignia TV, there are no channels, contact your cable or satellite TV provider, as reception can vary by channel depending on the broadcast power level of a given station. Make sure that the antenna or cable/satellite TV is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV.
Why is there no sound coming from one speaker on my Insignia TV?
If there is no output from one of the speakers on your Insignia TV, adjust the audio balance. Also, make sure that the audio cables are connected correctly and securely to your TV.
Why are there lines on my Insignia TV screen?
If you see dotted lines or stripes on the screen of your Insignia TV, make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Make sure that the video cables are connected securely to your TV. The video cables may be bad, so try a new set. Other devices may be interfering with your TV, so try turning off one device at a time to determine which device is causing interference and move it further from the TV.
Why is there no color on my Insignia NS-40D40SNA14 TV?
If there is no color, the picture is dark, or the color is incorrect on your Insignia TV, try switching to another channel, as the station may be experiencing problems. Also, adjust the color settings. Make sure that the video cables are connected correctly and securely to your TV. Ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
General| Screen Size | 40 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LED |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60Hz |
| Smart TV | Yes |
