Insignia NS-46L400NA14 - Browsing and Viewing Photos; Browsing Photos on USB Drive

59
Insignia 46" LCD TV
www.insigniaproducts.com
Displaying a list of INlink-compatible
(HDMI CEC) devices
You can display a list of HDMI CEC devices that are
connected to your TV.
To display a list of INlink-compatible (HDMI CEC)
devices:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
S or T to highlight INlink Device Lists,
then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Waking INlink-compatible (HDMI CEC)
devices
When a connected INlink-compatible device is in
turned off (standby mode), Connect wakes (turns
on) the device.
To wake INlink-compatible (HDMI CEC) devices:
1 Press INPUT, press
S or T to highlight the HDMI
CEC device you want to wake, then press
ENTER.
2 Press MENU. The on-screen menu opens.
3 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
4 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
5 Press
S or T to highlight Connect, then press
ENTER. Your TV switches to the HDMI CEC
device you selected.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.