19
Insignia 55" 1080p LCD TV
www.insigniaproducts.com
Using analog audio
To connect a home theater system using analog
audio:
1 Make sure that your TV’s power cord is
unplugged and the home theater system is
turned off.
2 Connect a 3.5mm audio cable (not provided) to
the /AUDIO OUT jack on the side of your TV
and to the AUDIO IN jacks on the analog home
theater system.
Connecting a home theater system with
multiple devices
The connections you make depend on the video
and audio jacks available on your devices. Refer to
the documentation that came with your devices for
connection information.
Just remember to use the best connection types
available for the best picture and sound. For
information about connection types, see “What
connection should I use?” on page 9.
Note
When you connect a home theater using analog
audio, audio plays through both the home theater
speakers and the TV speakers. If you do not want
audio to play through the TV speakers, set the TV
Speakers setting on the Audio menu to Off. For more
information, see “Adjusting sound settings
” on
page 27
.
Note
You can connect headphones, an amplifier, a home
theater system, or a sound bar to the /AUDIO OUT
jack. If you want to use headphones, you need to
disconnect the amplifier, home theater system, or
sound bar.
3.5mm audio cable
Home theater system
Side of TV
Blu-ray player/DVD player/VCR
Cable/satellite box
AV rece iv er
Camcorder/game console
USB flash drive
Computer
Antenna or cable
TV connected
directly to the
wall jack
To Next Page
Loading...
