Insignia NS-AC08PWH1 - Final Window Sealing; Applying Non-Adhesive Seals

www.insigniaproducts.com
21
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1
4 Cut the non-adhesive foam C to fit the width (hung window) or height (sliding window) of the window, then insert the
foam between the glass and the window frame to prevent air and insects from getting into the room.
5 Optional: Install the security bracket using two screws. The security bracket helps keep the window from moving.
Non-adhesive
foam seal C
Non-adhesive
foam seal C
Hung window
Sliding window
Security
bracket
Security
bracket
Hung window
Sliding window