antenna body.
3. Screw the black knob on until it is snug.
Notes:
• This method is not intended for outdoor use, as wind and other factors can easily move the
antenna.
• Perform a channel scan whenever the antenna is moved, as available channels might change.
CONNECTING YOUR ANTENNA
Note: For the antenna to properly function, the power inserter must be installed and powered on.
1. Connect the included coaxial cable to the power inserter, then connect it to the antenna.
Note: A longer coaxial cable may need to be purchased if the included cable is not long enough
for your mounting position.
2. Choose which device (HDTV, digital converter box, or set-top box) to connect the power inserter
to.
HDTV
Connect the power inserter’s coaxial connection to the coaxial jack on the back of your TV.
Digital converter box or Set-top box
1. Connect the power inserter’s coaxial connection to the coaxial jack on your digital converter box
or set-top box (both are not included).
2. Connect a video/audio cable (such as an HDMI, a coaxial cable, or a composite cable) from your
converter box or set-top box to your TV.
To Next Page
Loading...