CONNECTING THE AC ADAPTER
Plug the AC adapter into a wall outlet, then plug the other end into the power inserter.
SCANNING FOR CHANNELS
1. Turn on your TV then press input or source to select the input your antenna is connected to
Note: Turn on your digital converter box or set-top box if your antenna is connected to either
device.
2. Open your device’s setup menu, then select the “scan” or “channel scan” option. Your device
automatically searches for available channels in your area.
Note: See your device’s manual for detailed instructions.
TIPS FOR BETTER RECEPTION
Install the antenna as high as possible to avoid possible obstacles between the antenna and
transmission tower. Obstacles may cause signal loss.
When installing indoors, place the antenna near a window. If the window has a metal screen,
place the antenna near a window that does not have a metal screen.
Keep the antenna away from sources of interference, such as air conditioners, hair dryers, or
microwave ovens.
Run a channel scan every time you move your antenna.
If possible, position your antenna toward the transmission tower. To determine which
channels are available in your area, visit www.antennaweb.org. Type in your zip code to get
help with antenna placement.
Test the antenna in multiple locations to find the strongest signal.
Run a channel scan monthly to make sure you are receiving all possible channels.
Some TVs have a signal strength indicator that can help with antenna placement. See your TV
manual to see if your TV has this feature.
This antenna works with any TV or device with an ATSC tuner. Refer to the device manual to
check compatibility.
The antenna’s range will vary depending on a wide range of environmental and geographic
factors—the mile range provided is only for reference.
TROUBLESHOOTING
To Next Page
Loading...