23
www.insigniaproducts.com
Blood Pressure Monitor
Recalling records
1 When the monitor is off, press MEM. The monitor cycles through the
last three records. If there are less than three records, it will show the
latest record instead.
2 If needed, press the user button to switch between User A or
User B’s records.
3 Press the MEM to move forward or SET to move backward through
the records. Press and hold MEM to look over ten records quickly.
Note: The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records are
pushed back one digit (for example, 2 becomes 3, and so on), and
the last record (250) is dropped from the list.
To Next Page
Loading...