6
Insignia Chest Freezer - White (3.5, 5, 7, or 10.2 Cu.ft.)
www.insigniaproducts.com
Exterior (NS-CZ70WH6 shown)
Setting up your freezer
Before using your freezer
• Remove the exterior and interior packing.
• Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
• Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
Finding a suitable location
• This freezer is designed to be free standing only, and should not be
recessed or built-in.
• Place your freezer on a floor that is strong enough to support the
freezer when it is fully loaded.
• Allow six inches (15 cm) of space between the back and sides of the
freezer and any surrounding walls to allow for proper air ventilation.
Adjust the feet to keep the freezer level.
Door handle
Door
Drain plug
Temperature
control
Blue indicator
Leveling feet
NS-CZ50WH6-CZ70WH6-CZ10WH6_15-0901_MAN_V2_ENG.fm Page 6 Wednesday, November 25, 2015 3:26 PM
To Next Page
Loading...
Need help?
General