Why doesn't the resume function work on my Insignia NS-D160A14 DVD Player?
The resume function might not work because if you press the STOP button twice, the resume information is erased. Also, some discs may not support the resume function.
Why does my Insignia NS-D160A14 DVD Player remote control not work?
First, make sure you've removed the plastic sheet protecting the battery. Then, ensure you're pointing the remote at the sensor on the front of the DVD player, with no obstructions in between. If it still doesn't work, replace the battery. Also, avoid direct sunlight or bright light on the sensor.
Why is my Insignia NS-D160A14 DVD Player not turning on?
Ensure the power cord is securely connected to the power outlet and that the power outlet is supplying power. Test the outlet by plugging in another device, like a lamp.
What to do if there is no sound from Insignia NS-D160A14?
First, make sure that your TV or home theater system is turned on and the sound isn't muted. Then, check that the volume is turned up and that your Insignia DVD player is correctly connected to the TV or home theater system.
How to fix no picture on Insignia NS-D160A14 DVD Player?
Make sure that your TV is turned on and set to the correct video input for your Insignia DVD player. Also, ensure that your DVD player is correctly connected to the TV.
What to do if Insignia NS-D160A14 DVD Player playback does not start?
Make sure the disc is face up in the disc tray and is not dirty. If it is dirty, see “Cleaning discs” on page13. Also, ensure the disc is not warped; try another disc to check.
Why is the picture distorted on my Insignia DVD Player?
Ensure the disc is clean and not scratched or warped. Try another DVD. Check that the TV is connected to the correct jacks on the DVD player and is set to the correct video input source. Interference from nearby devices may be the cause; try turning them off one at a time or moving them farther apart. As a last resort, turn off your DVD player, wait 10 seconds, then turn it back on.
Why does my Insignia NS-D160A14 DVD Player switch to standby mode?
After a period of inactivity, your Insignia DVD player switches to standby mode automatically as a power-saving feature. If it switches unexpectedly, a safety device may have been activated. Press the (Standby/On) button on the front of your DVD player.
What to do if my Insignia NS-D160A14 DVD Player freezes when reading a disc?
Make sure that the disc is not dirty. If your DVD player freezes again, the disc may contain some content that is not compatible with your DVD player. Do not try playing the disc with your DVD player. Reset your DVD player. For instructions, see “Resetting your DVD player” on page 13.
Why does my Insignia NS-D160A14 DVD Player open the disc tray when reading?
Make sure that the disc is not dirty. The disc may be incompatible with your DVD player, so try another disc. You can also try resetting your DVD player; see “Resetting your DVD player” on page 13 for instructions.
General| Brand | Insignia |
|---|---|
| Model | NS-D160A14 |
| Type | DVD Player |
| Remote Control | Yes |
| Progressive Scan | Yes |
| Power Supply | AC 120V, 60Hz |
| Disc Formats Supported | DVD, CD, CD-R, CD-RW |
| Video Output | Composite, Component |
| Audio Output | Stereo |
Covers specific hazards such as electric shock, lightning, replacement parts, safety checks, and power sources.
Detailed explanation of each button's function on the DVD player remote control.
Detailed steps for connecting the DVD player to a TV using component video cables for optimal quality.
Details on playable disc types, playing discs, and viewing JPEG pictures on the DVD player.
Guide to accessing the on-screen menu and displaying disc information.
Steps to reset the player and resolve common issues with power, picture, and sound.
Covers the terms, duration, and limitations of the product's 90-day limited warranty.
To Next Page
