Insignia NS-DFD04 User Manual

Diuser
Retaining strap
PACKAGE CONTENTS
• 12 × 8" Flash diuser*
• Storage bag
• Quick Setup Guide
FEATURES
• Creates soft, diused light, reducing shadows.
• Ideal for portrait shots, creating soft shadows, and catchlight in the eyes.
• Compatible with most shoe-mount ash units.
• Built-in strap holds the diuser securely on the ash.
ASSEMBLING AND ATTACHING YOUR FLASH DIFFUSER
1 Remove the diuser from its storage bag and
unfold it.
2 Loosen the strap and open the four aps on
the narrow end of the diuser.
3 Fit the narrow end of the diuser over the
ash head so at least one inch of the ash
head is covered.
4 Put the aps down, then tighten the
straps to secure the ash diuser.
5 Attach the ash and diuser assembly to your camera’s
hot-shoe.
6 Adjust the ash head to the desired angle. Turn the
camera and ash on and adjust the exposure.
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide | NS-DFD04
Flash Diuser 12 × 8
* Actual screen size 11.5 × 7.5"

Insignia NS-DFD04 Specifications

General

Brand	Insignia
Model	NS-DFD04
Category	Camera Accessories
Language	English

Summary

Package Contents and Features

Assembling and Attaching Your Flash Diffuser

Prepare the Diffuser

Remove the diffuser from its storage bag and unfold it, then loosen its strap and open the four flaps.

Attach Diffuser to Flash

Fit the diffuser's narrow end over the flash head, ensuring at least one inch is covered, then secure it with flaps and straps.

Mount and Position

Attach the flash and diffuser assembly to the camera's hot-shoe and adjust the flash head angle.

Final Adjustments

Turn on the camera and flash, then adjust the exposure settings as needed.

Specifications and Warranty Information

Contact and Company Information