Insignia NS-DTRP65 User Manual

QUICK SETUP GUIDE
64" Photo
Video Tripod
NS-DTRP65
PACKAGE CONTENTS
• Tripod
• Quick-release plate
• Carrying case
• Quick Setup Guide
FEATURES
• Supports cameras with standard 1/4"-20 tripod mount
up to 6.6 lbs. (3.0 kg)
• Aluminum legs and center column for minimal weight and
maximum strength
• Collapses to a length of 25.2" (64 cm) for Easy storage and
transportation
Before using your new product, please read these instructions to prevent any damage.
# ITEM
1 Quick-release plate
2 Leveling bubble
3 Pan locking knob
4 Locking knob
5 Crank handle
6 Quick-release plate
locking lever
7 Vertical tilt lock knob
8 Horizontal tilt lock
handle
9 Locking collar
10 Flip-lever leg locks
11 Universal ball rubber
foot
DESCRIPTION
Mount your camera to this plate, then mount this plate to
the tripod.
Allows for precise leveling of the tripod for perfect
alignment.
Locks the tripod head so that it will not rotate horizontally.
Locks the center column in place.
Raises and lowers the center column.
Secures the quick-release plate to the tripod.
Adjust vertical tilt up to 90 degrees.
Adjust the horizontal tilt.
Locks the tripod legs in place to provide maximum
stability and strength.
Lift to adjust leg height, then close to lock.
Rubber feet with ball design for ground leveling provide a
secure, non-marring footing for your tripod.

Insignia NS-DTRP65 Specifications

General

Brand	Insignia
Model	NS-DTRP65
Category	Camera Accessories
Language	English

Summary

Tripod Parts Identification

Quick-release plate

Mount camera to this plate, then mount the plate to the tripod.

Leveling bubble

Allows for precise leveling of the tripod for perfect alignment.

Pan locking knob

Locks the tripod head so that it will not rotate horizontally.

Locking knob

Locks the center column in place.

Crank handle

Raises and lowers the center column.

Quick-release plate locking lever

Secures the quick-release plate to the tripod.

Vertical tilt lock knob

Adjust vertical tilt up to 90 degrees.

Horizontal tilt lock handle

Adjust the horizontal tilt.

Locking collar

Locks tripod legs to provide maximum stability and strength.

Flip-lever leg locks

Lift to adjust leg height, then close to lock.

Universal ball rubber foot

Rubber feet with ball design for ground leveling provide secure footing.

Setting Up and Using the Tripod

Setting Up Your Tripod

Instructions on extending and stabilizing tripod legs and adjusting the center column.

Attaching Your Camera

Steps to attach a camera to the tripod using the quick-release plate.

Using Your Tripod

Guidance on positioning and adjusting tilt, pan, and stability for photography.

Storing Your Tripod

Procedure for safely collapsing and storing the tripod, including the carrying case.

Important Safety and Specifications

Important Safety Instructions

Crucial safety guidelines for tripod use, handling, and environmental precautions.

Specifications

Key technical details including maximum height, weight, and load capacity.